Beginner's Guide to Installing a New Shower Unit

Beginner's Guide to Installing a New Shower Unit

Blog Article

Call Today

What're your thoughts about How to Install a One-Piece Shower Unit?

An effective shower setup needs mindful planning as well as a great deal of work. In most cases, you will need to do 3 sorts of tasks: mounting walls, installing the plumbing, as well as completing wall surfaces.

Prep work

To start with, you need to choose the type of shower that you wish to mount. It is essential to establish whether the selected shower is capable of coping with specific systems as well as can regulate a secure degree of water through the boiler. A lot of shower units nowadays are made to be flexible to different water stress (such as kept hot water and chilly keys).
It is also important to take into consideration the water pressure as well as the planning of the piping and drain for the shower

Different Types of Shower Units

Push-on Mixer: The hose pipe as well as spray parts of the push-on mixer shower device can be attached to the bathroom faucet as per your demand, and also the water temperature level can be changed through the faucets. Push-on mixers are cheap as well as exceptionally easy to set up. Nevertheless, although the hose link is straightforward, it is easily displaced. In addition, it is bothersome to change the temperature level.

Bath/Shower Mixer: The hose and spray of this type of shower are integrated with a bath mixer tap, and the temperature can be changed through the bath taps. It is an extremely cheap option and no extra plumbing is included. Nevertheless, the bath/shower mixers also deal with troublesome temperature control alternatives.

Guidebook Mixer: The hose and spray of a hand-operated mixer shower system are a part of the wall system and also the hot and cold water supplies are linked to a solitary valve The temperature level and also stress of the water are managed through either one or a variety of knobs (in much more pricey showers). Although temperature control is a lot easier in hand-operated mixer types, they are much more costly than the formerly pointed out mixers. They likewise call for added plumbing of cold and hot water system pipes.

Thermostatic Mixer: The pipe as well as spray of this shower kind are a part of the wall surface unit and also the hot and cold water supplies are attached to a single shutoff right here also. It is total with a built-in stabiliser to self-adjust the water temperature and to avoid it from ending up being as well hot. One of the biggest benefits of a thermostatic mixer shower kind includes practical temperature control. However, it is the most pricey of the various mixer choices.

Power Shower: A power shower is a solitary device consisting of a powerful electrical pump that is capable of modifying both the water stress and temperature level. This type of shower can be fitted if there is supply of water from a cold water tank and also a hot water cylinder. A power shower makes the change of both stress and also temperature very easy. On the other hand, it is unsuitable for water warmed straight by the shower or where the water is supplied by a mix boiler under keys stress.

Electric Shower: An electrical shower is plumbed into a keys cold water supply and it heats the water electrically. It is essential to note that for this shower kind to be set up, the mains stress requires to be a minimum of 0.7 kg/sq cm (10lb/sq in). The device enables the temperature level and also stress to be changed by means of a handle. Models with temperature stabilisers are better as they remain untouched by various other taps elsewhere being used within the house. A major drawback of electric showers is that the control handle just permits the choice of heats at much less pressure, or reduced temperature levels at a higher stress. This is problematic in the winter when the spray is frequently weak as well as the keys water is colder. Nevertheless, this trouble is taken on in some designs which are readily available with a winter/summer setup.

Method

Depending on the type of shower you want to install, the shower head have to either be fitted in order to prevent its contact with the water in the bath below or the base tray, or it needs to have a check valve.
Prior to starting, it is a good idea to note the positions of the shower head and also control, as well as to intend the pipe-work entailed. Furthermore, the water drainage system to get rid of the waste water will need to be intended. Both settings of the wire route as well as the shower button will likewise require to be taken into consideration if an immediate or electric shower system is being set up.
Make use of the guideline overview supplied with the shower unit to fit the shower control.Before fitting the pipes that will supply the water to the shower system, it is very important to cut off the water system. In order to shield the pipelines, they ought to be provided a water resistant covering as well as also fitted with isolating valves. The pipelines can then be hidden right into the wall surface and also glued over to neaten the total look.
Fit the base tray, shower head, and also installations.
Link the major shower control to the pipelines that will be providing the water (This may require a women screw string adapter).
Reconnect the supply of water as well as examination the pipes for any leakages, as some may need tightening up.
If you are installing an electric shower, bear in mind to switch off the electrical energy supply prior to making any kind of electrical links. Once these links have actually been made (there should be guidance within the instruction manual), the power supply can be changed back on.

Changing Water Stress to Suit Your Shower

The cold water storage tank can be raised to a higher height (in some cases just 150mm (6inches)) by fitting a strong wood assistance beneath it - perhaps made up of struts and blockboards. If you pick this option, the main and also circulation pipes will also have to be raised to satisfy the new elevation of the reservoir.
Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it should be linked into the power supply in order to operate.

Piping and Drainage

It is best to utilize 15mm size supply pipelines, and also make the go to the shower as short and also straight as possible so as to preserve maximum stress as well as minimise warmth loss. In addition, by minimising making use of joints for pipe edges, you can decrease the resistance in the flow of the water. You can attain this by bending the pipes rather.

A Lot Of Usual Blunders

Violating or neglecting regional code restrictions.

Utilizing pipes that are as well tiny.

Attaching copper to galvanized without utilizing a brass or dielectric fitting in between both.

Not making use of tape or pipe substance at threaded joints.

Uneven your components when mounting them.

Not setting up an air space filling up for components.

Reducing supply stub outs as well brief to install the shutoff valves onto after the completed wall remains in place.

Not effectively aligning tubing right into installations or quit shutoffs. (Forcing the nut onto the compression ring at an angle when the tubing is at an angle will certainly trigger a leak.).

When transforming the water back on in your house, always run the outdoors hose shutoff or flush your commodes to hemorrhage dirt as well as air from the lines. This debris can create problems in your sink faucets and various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Hopefully you liked our excerpt about How to Install a Direct-to-Stud Shower Enclosure. Thanks a ton for taking a few minutes to browse our short article. Kindly take the opportunity to share this page if you appreciated it. Thank you for taking the time to read it.

Recurring Service Plans

Report this page